Harborwright sells the part only — we don't install it. These are general steps; your boat and the maker's manual come first. If you're not sure, have a marine shop fit it.
Safety: Make sure it's holding before you leave the boat, and stay within VEVOR's rating (under 20 ft, up to 2,200 lb).
Steps
- Pick firm sand in shallow water or on the beach.
- Push the tip in and twist the T-handle clockwise until the spiral blade is fully buried.
- Take the handle off (it comes off once the anchor is set).
- Tie the elastic line from the anchor to a bow or stern cleat.
- To pull it, refit the handle and twist counter-clockwise. Rinse it with fresh water afterward.
Follow the maker's manual for your exact model first — it's linked with each part below.
Videos
Videos are by other channels and show similar parts, not always the exact model we sell.
