Harborwright sells the part only — we don't install it. These are general steps; your boat and the maker's manual come first. If you're not sure, have a marine shop fit it.
Safety: Fasten into studs, solid wood or masonry — not drywall alone — and stay within the rated load.
Steps
- Pick the wall and find the studs (or confirm brick or block) where the uprights will go.
- Hold each upright level, mark the holes, and check for wiring or pipes before drilling.
- Fasten the uprights with the included hardware, spaced to suit your boats.
- Fit the padded arms at the heights you need, using the preset holes.
- Lift the boats on hull-side down, centered on the arms, and use the tie-down points if the rack has them.
Follow the instructions that come in the box for your exact model first.
Videos
Videos are by other channels and show similar parts, not always the exact model we sell.
