Harborwright sells the part only — we don't install it. These are general steps; your boat and the maker's manual come first. If you're not sure, have a marine shop fit it.
Steps
- Inflate each fender firm with the included pump and needle.
- Thread a rope through the center hole. They hang vertically or horizontally.
- Tie to a cleat or rail (a clove hitch is quick to adjust) so each fender sits where the hull would touch the dock.
- Bring them aboard once you're under way.
Follow the instructions that come in the box for your exact model first.
Videos
Videos are by other channels and show similar parts, not always the exact model we sell.
